Wheel Alignment (Unladen*1)*6
WARNING: This page is about a different car, the 2006 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL ALIGNMENT (UNLADEN*1)*6 SPECIFICATION
| Drive type |
2WD |
4WD |
| Camber Degree minute (decimal degree) |
Minimum |
-0° 30' (-0.50°) |
-0° 15' (-0.25°) |
| Nominal |
0° 15' (0.25°) |
0° 30' (0.50°) |
| Maximum |
1° 0'(1.00°) |
1° 15'(1.25°) |
| Cross camber |
0° 45' (0.75°) or less |
0° 45' (0.75°) or less |
| Caster Degree minute (decimal degree) |
Minimum |
2° 15'(2.25°) |
2° 0' (2.00°) |
| Nominal |
3° 0' (3.00°) |
2° 45' (2.75°) |
| Maximum |
3° 45' (3.75°) |
3° 30' (3.50°) |
| Cross caster |
0° 45' (0.75°) or less |
0° 45' (0.75°) or less |
| Kingpin inclination Degree minute (decimal degree) |
Nominal |
13° 0'(13.00°) |
12° 45'(12.75°) |
|
|
| Total toe-in |
Distance (A - B) |
Minimum |
3.0 mm (0.12 in) |
3.0 mm (0.12 in) |
| Nominal |
4.0 mm (0.16 in) |
4.0 mm (0.16 in) |
| Maximum |
5.0 mm (0.20 in) |
5.0 mm (0.20 in) |
| Angle (left wheel or right wheel) Degree minute (decimal degree) |
Minimum |
0° 7'(0.12°) |
0° 7'(0.12°) |
| Nominal |
0° 9'(0.15°) |
0° 9'(0.15°) |
| Maximum |
0° 11'(0.18°) |
0° 11'(0.18°) |
| Wheel turning angle (full turn) |
Inside Degree minute (Decimal degree) |
33° 27' - 35° 27'2 (33.45° - 35.45°) |
33° 41' - 35° 41'4 (33.68° - 35.68°) |
| Outside Degree minute (Decimal degree) |
29° 25' - 31° 25'3 (29.42° - 31.42°) |
29° 57' - 31° 57'5 (29.95° - 31.95°) |