Oil Adjusting Procedure for Components Replacement Except Compressor
WARNING: This page is about a different car, the 2006 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
After replacing any of the following major components, add the correct amount of oil to the system.
Amount of oil to be added
OIL ADJUSTING PROCEDURE FOR COMPONENTS
| Part replaced | Oil to be added to system | Remarks | ||
|---|---|---|---|---|
| Amount of oil m l (US fl oz, Imp fl oz) | ||||
| Front evaporator | 75 (2.5, 2.6) | - | ||
| Rear evaporator | 75 (2.5, 2.6) | - | ||
| Condenser | 75 (2.5, 2.6) | - | ||
| Liquid tank | 5 (0.2, 0.2) | Add if compressor is not replaced. | ||
| In case of refrigerant leak | 30 (1.0, 1.1) | Large leak | ||
| - | Small leak (1) | |||
|
||||