LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1642 (Body Control System) >> BCM (Body Control Module) >> CONSULT-II Function (BCM) >> Work Support >> Operation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Operation Procedure

WARNING: This page is about a different car, the 2005 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "BCM" on "SELECT TEST ITEM" screen.
    Fig 1: CONSULT-II Display - Select Test Item
    G03597484Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Touch "WORK SUPPORT" on "SELECT DIAG MODE" screen.
  3. Touch item on "SELECT WORK ITEM" screen.
  4. Touch "START".
  5. Touch "CHANGE SET".
  6. The setting will be changed and "RESETTING COMPLETED" will be displayed.
  7. Touch "END".
    Fig 2: CONSULT-II Display - Select Work Item
    G03597485Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals