LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Murano SL, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2234 (Engine Control System - Introduction) >> Basic Service Procedure >> Idle Mixture Ratio Adjustment >> Preparation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Idle Mixture Ratio Adjustment: Preparation

WARNING: This page is about a different car, the 2005 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Make sure that the following parts are in good order.
    • Battery
    • Ignition system
    • Engine oil and coolant levels
    • Fuses
    • ECM harness connector
    • Vacuum hoses
    • Air intake system (Oil filler cap, oil level gauge, etc.)
    • Fuel pressure
    • Engine compression
    • Throttle valve
    • Evaporative emission system
  2. On air conditioner equipped models, checks should be carried out while the air conditioner is OFF.
  3. On automatic transmission equipped models, when checking idle rpm, ignition timing and mixture ratio, checks should be carried out while shift lever is in P or N position (A/T), Neutral position (M/T).
  4. When measuring CO percentage, insert probe more than 40 cm (15.7 in) into tail pipe.
  5. Turn OFF headlamp, heater blower.
  6. Keep front wheels pointed straight ahead.