2. Check Fuel Tank Temperature Sensor Power Supply Circuit

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch OFF.
Disconnect "fuel level sensor unit and fuel pump" harness connector.
Turn ignition switch ON.

Fig 1: Disconnect "Fuel Level Sensor Unit And Fuel Pump" Harness Connector
Courtesy of NISSAN MOTOR CO., U.S.A.
Check voltage between "fuel level sensor unit and fuel pump" terminal 4 and ground with CONSULT-II or tester.
1. Voltage: Approximately 5V

OK or NG

OK: GO TO 4 .
NG: GO TO 3.

Fig 2: Check Voltage

Courtesy of NISSAN MOTOR CO., U.S.A.