DTC Confirmation Procedure (DTC P1124)

WARNING: This page is about a different car, the 2003 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If DTC confirmation procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

NOTE: For diagnostic procedure, see DIAGNOSTIC PROCEDURE .

For DTC P1124 confirmation procedure, see Fig 1.

Fig 1: Identifying DTC Confirmation Procedure For DTC P1124: Throttle Control Motor Relay

Courtesy of NISSAN MOTOR CO., U.S.A.