Method For Erasing The EEPROM In The TCM
WARNING: This page is about a different car, the 2004 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
- Connect CONSULT-II to data link connector.
- Turn ignition switch ON. Confirm that CONSULT-II turn "ON".
- Move selector lever in "R" position.
- Touch "START" on CONSULT-II.
- SELECT "SELF-DIAG RESULTS" mode for "A/T" with CONSULT-II.
- Fully press the accelerator pedal (8/8 throttle), and hold it in the fully open position. (This will set the closed throttle position signal to "OFF".)
- Touch "ERASE" on CONSULT-II, and then touch "YES".
- Wait 3 seconds and then release the accelerator pedal.
- Turn ignition switch OFF.