LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2005 >> Quest Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 886 (Engine Control System - DTCS P0137 Through P0443) >> DTC P0222, P0223 TP Sensor >> CONSULT-III Reference Value in Data Monitor Mode
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

CONSULT-III Reference Value in Data Monitor Mode

WARNING: This page is about a different car, the 2008 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

Specification data are reference values.

CONNECTOR TERMINAL SPECIFICATION DATA REFERENCE VALUES

MONITOR ITEM CONDITION SPECIFICATION
THRTL SEN 1
THRTL SEN 2(1)
  • Ignition switch: ON (Engine stopped)
  • Shift lever: D
 Accelerator pedal: Fully released More than 0.36V
Accelerator pedal: Fully depressed Less than 4.75V
(1) Throttle position sensor 2 signal is converted by ECM internally. Thus, it differs from ECM terminal voltage signal.
scientia non olet · About LEMON Manuals