LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2005 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Brake Control System) >> Service Information >> Trouble Diagnosis For Self-Diagnostic Items >> CAN Communication System Inspection >> Inspection Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Inspection Procedure

WARNING: This page is about a different car, the 2009 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK CONNECTOR
    1. Turn ignition switch OFF, disconnect the ABS actuator and electric unit (control unit) connector and check the terminals for deformation, disconnection, looseness, and so on. If there is a malfunction, repair or replace the terminal.
    2. Reconnect connector to perform self-diagnosis.

    Is "CAN COMM CIRCUIT" displayed in self-diagnosis display items? 

    YES: Print out the self-diagnostic results, and refer to "TROUBLE DIAGNOSIS FLOW CHART ".

    NO: Connector terminal is loose, damaged, open, or shorted.

scientia non olet · About LEMON Manuals