LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2005 >> X-Trail LE >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component Testing >> ASCD Brake Switch >> Component Inspection >> ASCD Clutch Switch
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

ASCD Clutch Switch

  1. Turn ignition switch OFF.
  2. Disconnect ASCD clutch switch harness connector.
  3. Check continuity between ASCD clutch switch terminals 1 and 2 under the following conditions.
CONTINUITY CHART

Condition Continuity
Brake pedal: Fully released. Should exist.
Brake pedal: Slightly depressed. Should not exist.
Fig 1: Checking Continuity Between ASCD Brake Switch Terminals 1 And 2
G06152893Courtesy of NISSAN MOTOR CO., U.S.A.

If NG, adjust ASCD clutch switch installation, refer to "CLUTCH PEDAL ", and perform step  3 again.

scientia non olet · About LEMON Manuals