Input Shaft Thrust Washer
WARNING: This page is about a different variant/trim than selected.
INPUT SHAFT THRUST WASHER SPECIFICATIONS
| Standard value for dimension "C2" | 154.7 - 154.8 mm (6.091 - 6.094 in) | ||||
|---|---|---|---|---|---|
| Thickness mm (in) | Part number(1) | Thickness mm (in) | Part number(1) | ||
| 3.84 (0.1512) | 32347 8H500 | 4.02 (0.1583) | 32347 8H503 | ||
| 3.90 (0.1535) | 32347 8H501 | 4.08 (0.1606) | 32347 8H504 | ||
| 3.96 (0.1559) | 32347 8H502 | 4.14 (0.1630) | 32347 8H505 | ||
|
|||||