CONSULT-III Reference Value in Data Monitor Mode

WARNING: This page is about a different variant/trim than selected.

Specification data are reference values.

MONITOR ITEM CONDITION CHART

MONITOR ITEM	CONDITION	SPECIFICATION
HO2S2 (B1)	Revving engine from idle to 3, 000 rpm quickly after the following conditions are met. Engine: After warming up Keeping the engine speed between 3, 500 and 4, 000 rpm for 1 minute and at idle for 1 minute under no load	0 - 0.3V ← → Approx. 0.6 - 1.0V
HO2S2 MNTR (B1)	LEAN ← → RICH

MONITOR ITEM

CONDITION

SPECIFICATION

HO2S2 (B1)

Revving engine from idle to 3, 000 rpm quickly after the following conditions are met.

Engine: After warming up
Keeping the engine speed between 3, 500 and 4, 000 rpm for 1 minute and at idle for 1 minute under no load

0 - 0.3V ← → Approx. 0.6 - 1.0V

HO2S2 MNTR (B1)

LEAN ← → RICH