Removal and Installation

WARNING: This page is about a different car, the 2009 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the battery negative terminal. Refer to "REMOVAL AND INSTALLATION ".
Remove the front pillar upper finisher (RH). Refer to "COMPONENT ".
Remove the side ventilator grille (RH). Refer to "EXPLODED VIEW ".
Remove the instrument side finisher. Refer to "EXPLODED VIEW ".
Remove the upper glove box. Refer to "EXPLODED VIEW ".
Remove the bolt (A), disconnect the harness connector (1) and remove the remote keyless entry receiver (2).

Fig 1: Identifying Harness Connector, Remote Keyless Entry Receiver And Bolt
Courtesy of NISSAN MOTOR CO., U.S.A.

Installation is in the reverse order of removal.