LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2008 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 181 (Automatic Drive Positioner) >> Ecu Diagnosis Information >> Automatic Drive Positioner Control Unit >> Reference Value >> Physical Values
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Physical Values

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
Terminal No. Wire color Description Condition Voltage (V) (Approx.)
+ - Signal name Input/Output
2 Ground L Changeover switch RH signal Input Changeover switch position RH 0
Neutral or LH 5
3 Ground SB Mirror switch up signal Input Mirror switch Operated (up) 0
Other than above 5
4 Ground V Mirror switch left signal Input Mirror switch Operated (left) 0
Other than above 5
5 Ground R Door mirror sensor (RH) up/down signal Input Door mirror RH position Peak 3.4
Valley 0.6
6 Ground L Door mirror sensor (LH) up/down signal Input Door mirror LH position Peak 3.4
Valley 0.6
8 Ground O Pedal sensor input signal Input Pedal sensor Forward 0.5
Backward 4.5
9 Ground LG Memory switch 1 signal Input Memory switch 1 Push 0
Other than above 5
10 Ground SB UART LINE (TX) Output Ignition switch ON
G04902962
12 Ground W Memory indictor 1 signal Output Memory indictor 1 Illuminate 0
Other than above Battery voltage
13 Ground Y Memory indictor 2 signal Output Memory indictor 2 Illuminate 0
Other than above Battery voltage
14 Ground GR Door mirror motor (RH) up output signal Output Door mirror RH Operate (up) 1.5 - Battery voltage
Other than above 0
15 Ground V Door mirror motor (RH) left output signal Output Door mirror RH Operate (left) 1.5 - Battery voltage
Other than above 0
16 Ground O Door mirror motor (LH) down output signal Output Door mirror (LH) Operate (down) 1.5 - Battery voltage
Other than above 0
Door mirror motor (LH) right output signal Operate (right) 1.5 - Battery voltage
Other than above 0
18 Ground Y Changeover switch LH signal Input Changeover switch position LH 0
Neutral or RH 5
19 Ground BR Mirror switch down signal Input Mirror switch Operate (down) 0
Other than above 5
20 Ground GR Mirror switch right signal Input Mirror switch Operate (right) 0
Other than above 5
21 Ground P Door mirror sensor (RH) left/right signal Input Door mirror RH position Left edge 3.4
Right edge 0.6
22 Ground G Door mirror sensor (LH) left/right signal Input Door mirror LH position Left edge 0.6
Right edge 3.4
24 Ground GR Set switch signal Input Set switch Push 0
Other than above 5
25 Ground P Memory switch 2 signal Input Memory switch 2 Push 0
Other than above 5
26 Ground G UART LINE (RX) Input Ignition switch ON
G04902965
30 Ground G Door mirror motor (RH) down output signal Output Door mirror (RH) Operate (down) 1.5 - Battery voltage
Other than above 0
Door mirror motor (RH) right output signal Operate (right) 1.5 - Battery voltage
Other than above 0
31 Ground R Door mirror motor (LH) up output signal Output Door mirror (LH) Operate (up) 1.5 - Battery voltage
Other than above 0
32 Ground B Door mirror motor (LH) left output signal Output Door mirror (LH) Operate (left) 1.5 - Battery voltage
Other than above 0
33 Ground W Sensor power supply Input - 5
34 Ground R Battery power source Input - Battery voltage
37 Ground G Pedal adjusting motor forward output signal Output Pedal adjusting motor Operate (forward) Battery voltage
Other than above 0
39 Ground SB Battery power source   - Battery voltage
40 Ground B Ground - - 0
41 Ground Y Sensor ground - - 0
45 Ground BR Pedal adjusting motor backward output signal Output Pedal adjusting motor Operate (backward) Battery voltage
Other than above 0
48 Ground B Ground - - 0