LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2008 >> Sentra SL >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Introduction (MR20DE) >> Basic Service Procedure >> Fuel Pressure Check >> Fuel Pressure Release >> With CONSULT-III
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

With CONSULT-III

  1. Turn ignition switch ON.
  2. Perform "FUEL PRESSURE RELEASE " in "WORK SUPPORT" mode with CONSULT-III.
  3. Start engine.
  4. After engine stalls, crank it two or three times to release all fuel pressure.
  5. Turn ignition switch OFF.
scientia non olet · About LEMON Manuals