LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2009 >> Maxima SV >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component Testing >> ASCD Brake Switch >> Component Inspection (ASCD Brake Switch)
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Component Inspection (ASCD Brake Switch)

  1. CHECK ASCD BRAKE SWITCH-I
    1. Turn ignition switch OFF.
    2. Disconnect ASCD brake switch harness connector.
    3. Check the continuity between ASCD brake switch terminals under the following conditions.
      CONTINUITY CHART

      Terminals Condition Continuity
      1 and 2 Brake pedal Fully released. Existed
      Slightly depressed. Not existed
      Fig 1: Checking Continuity Between ASCD Brake Switch Terminals
      G05869967Courtesy of NISSAN MOTOR CO., U.S.A.

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: GO TO 2.

  2. CHECK ASCD BRAKE SWITCH-II
    1. Adjust ASCD brake switch installation. Refer to "INSPECTION AND ADJUSTMENT ".
    2. Check the continuity between ASCD brake switch terminals under the following conditions.
      CONTINUITY CHART

      Terminals Condition Continuity
      1 and 2 Brake pedal Fully released. Existed
      Slightly depressed. Not existed
      Fig 2: Checking Continuity Between ASCD Brake Switch Terminals
      G05869968Courtesy of NISSAN MOTOR CO., U.S.A.

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Replace ASCD brake switch.

scientia non olet · About LEMON Manuals