LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2011 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 72 (Hybrid Control System - Component Testing) >> Unit Removal And Installation >> Frame Wire >> Removal and Installation >> Frame Wire (Electric Compressor)
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Frame Wire (Electric Compressor)

WARNING: This page is about a different variant/trim than selected.

Removal

  1. Remove the air cleaner and air duct. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove the front terminal cover bolt from the inverter cover and disconnect the electric compressor inverter connector from the inverter. Refer to "REMOVAL AND INSTALLATION ".
  3. Disconnect the electric compressor connector from the electric compressor. Refer to "REMOVAL AND INSTALLATION ".
  4. Remove the front engine mounting insulator and bracket bolts. Refer to "REMOVAL AND INSTALLATION ".
  5. Remove the electric compressor frame wire harness clips and electric compressor frame wire harness from the vehicle.

Installation

Installation is in the reverse order of removal.

scientia non olet · About LEMON Manuals