LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2011 >> Cube Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTC P0507 Through DTC P2A00 (For CALIFORNIA) >> DTC P0607: ECM >> Diagnosis Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Diagnosis Procedure

  1. INSPECTION START
    1. Turn ignition switch ON.
    2. Erase DTC. Refer to "How to Erase DTC and 1st Trip DTC" in "CONSULT-III FUNCTION ".
    3. Perform DTC CONFIRMATION PROCEDURE. Refer to "DTC LOGIC ".
    4. Check DTC.

      Is the DTC P0607 displayed again? 

      YES: Go to 2.

      NO: INSPECTION END

  2. REPLACE ECM
    1. Replace ECM.
    2. Perform "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT: SPECIAL REPAIR REQUIREMENT ".

      INSPECTION END