September 30: LEMON manuals is back up on a temporary server! Slowness is possible
DTC Detection Logic
NOTE:
- If DTC B26F4 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to
"DTC LOGIC
".
- If DTC B26F4 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to
"DTC LOGIC
".
DTC DETECTION CONDITION CHART
| DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
| B26F4 |
START CONT RELAY OFF |
BCM requests IPDM E/R to turn starter control relay ON but starter control relay ON state signal is not transmitted from IPDM E/R. |
- Harness or connector (Transmission range switch circuit is open or short).
- IPDM E/R
- BCM
|