LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2011 >> Leaf SV >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System >> DTC/Circuit Diagnosis >> DTC U1010: Control Unit (Can) >> DTC Logic >> DTC Confirmation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

DTC Confirmation Procedure

  1. PRECONDITIONING

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn power switch OFF and wait at least 10 seconds before conducting the next test.

    GO TO 2.

  2. CHECK DTC DETECTION

    With CONSULT

    1. Turn the power switch OFF → ON.
      CAUTION:
      • Be sure to wait of 10 seconds after turning power switch OFF or ON.
      • Set the vehicle to READY.
    2. Repeat step  1 two or more times.
    3. Perform self-diagnosis for "ABS".

      Is DTC "U1010" detected? 

      YES: Proceed to "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END

scientia non olet · About LEMON Manuals