September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Component Inspection

CHECK DOOR SWITCH

Turn ignition switch OFF.
Disconnect door switch connector.

Check door switch.

CONTINUITY REFERENCE CHART

Terminal			Condition	Continuity
Each door	2	Ground	Door switch pressed	Exists
Each door	2	Ground	Door switch released	Does not exist
Back door	3	4	Back door open	Exists
Back door	3	4	Back door close	Does not exist

Is the inspection result normal?

YES: INSPECTION END

NO: Replace door switch. Refer to "REMOVAL AND INSTALLATION ".