LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2011 >> Sentra SE-R Spec V, RS6F52H >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension >> Service Information >> Coil Spring And Strut >> Removal and Installation >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal and Installation: Removal

  1. Remove cowl top panel. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove front tires using power tool.
  3. Remove harness of wheel sensor from strut assembly. Refer to "REMOVAL AND INSTALLATION ".
    CAUTION: Do not pull on wheel sensor harness.
  4. Remove brake hose lock plate. Refer to "HYDRAULIC CIRCUIT ".
  5. Remove the nut on the upper side of stabilizer connecting rod using power tool, and then remove stabilizer connecting rod from strut assembly.
  6. Remove nuts and bolts, and then remove steering knuckle from strut assembly. Refer to "REMOVAL AND INSTALLATION ".
  7. Remove the strut mounting insulator bolts, then remove strut assembly.
    Fig 1: Location Of Strut Mounting Insulator Bolts
    G04927227Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals