Removal and Installation: Installation

Installation is in the reverse order of removal.

• Tighten the bolts to specification.

  Tightening torque: 36 N.m (3.7kg-m, 27 ft-lb) 

  Fig 1: Identifying Transfer Assembly Bolts

  Courtesy of NISSAN NORTH AMERICA, INC.
• Fill the transfer with new fluid. Refer to "Replacement ".
• Check the transfer fluid. Refer to "TRANSFER FLUID: INSPECTION ".
• Start the engine for one minute. Then stop the engine and recheck the transfer fluid. Refer to "TRANSFER FLUID: INSPECTION ".
• After the installation, check the 4WD shift indicator pattern. If NG, adjust the position between the transfer assembly and transfer control unit. Refer to "Precaution for Transfer Assembly and Transfer Control Unit Replacement ".