How to Display SRT Status
WARNING: This page is about a different variant/trim than selected.
With CONSULT
Selecting "SRT STATUS" in "DTC CONFIRMATION" mode with CONSULT.
For items whose SRT codes are set, "CMPLT" is displayed on the CONSULT screen; for items whose SRT codes are not set, "INCMP" is displayed.
NOTE:
- Though displayed on the CONSULT screen, "HO2S HTR" is not SRT item.
- "SRT STATUS" provides the presence or absence of permanent DTCs stored in ECM memory.
With GST
Selecting Service $01 with GST
No Tools
A SRT code itself cannot be displayed, however SRT status can.
- Turn ignition switch ON and wait 20 seconds.
- SRT status is indicated as shown below.
When all SRT codes are set, MIL illuminates continuously.
- When any SRT codes are not set, MIL will blink periodically for 10 seconds.