DTC Confirmation Procedure
WARNING: This page is about a different car, the 2013 Nissan Cube. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
- Turn ignition switch ON under the following conditions.
- Selector lever is in the P or N position
- Do not depress brake pedal
- Turn ignition switch OFF.
- Turn ignition switch ON under the following conditions.
- Selector lever is in the P or N position
- Do not depress brake pedal
- Check "Self-diagnosis result" using CONSULT.
Is the DTC detected?
YES: Refer to "DIAGNOSIS PROCEDURE ".
NO: INSPECTION END.
- Turn ignition switch ON under the following conditions.