DTC Detection Logic
WARNING: This page is about a different car, the 2013 Nissan Cube. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- If DTC B2608 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to
"DTC LOGIC
".
- If DTC B2608 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to
"DTC LOGIC
".
| DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
| B2608 |
STARTER RELAY |
BCM outputs starter relay OFF but IPDM E/R receives starter relay ON signal. |
- Harness or connectors (Starter relay circuit is open or shorted.)
- IPDM E/R
|