September 30: LEMON manuals is back up on a temporary server! Slowness is possible

DTC Confirmation Procedure

PRECONDITIONING

If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn power switch OFF and wait at least 10 seconds before conducting the next test.

GO TO STEP 2 .

CHECK DTC DETECTION

With CONSULT
1. Turn the power switch OFF → ON.
  CAUTION:
  - Be sure to wait of 10 seconds after turning power switch OFF or ON.
  - Set the vehicle to READY.
2. Repeat step 1 two or more times.
3. Perform "Self Diagnostic Result" of "ABS".
Is DTC "C1142" detected?

YES

Proceed to DIAGNOSIS PROCEDURE .

NO

Inspection End