LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2016 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (Power Control System (Power Distribution System)) >> DTC/Circuit Diagnosis >> DTC U1000: Can Comm Circuit >> DTC Description >> Fail-Safe >> If No Can Communication Is Available With BCM
April 5, 2026: LEMON Manuals is launched! Read the announcement.

If No Can Communication Is Available With BCM

WARNING: This page is about a different car, the 2016 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
Control Part Fail-Safe Operation
Headlamp
  • Turns ON the headlamp low relay when the ignition switch is turned ON.
  • Turns OFF the headlamp low relay when the ignition switch is turned OFF.
  • Headlamp high relay OFF
  • Parking lamp
  • License plate lamp
  • Illumination
  • Tail lamp
  • Side marker lamp
  • Turns ON the tail lamp relay when the ignition switch is turned ON.
  • Turns OFF the tail lamp relay when the ignition switch is turned OFF.
Front Wiper Motor
  • The status just before activation of fail-safe control is maintained until the ignition switch is turned OFF while the front wiper is operating at LO or HI speed.
  • The wiper is operated at LO speed until the ignition switch is turned OFF if the fail-safe control is activated while the front wiper is set in the INT mode and the front wiper motor is operating.
  • Returns automatically wiper to stop position when ignition switch is turned ON if fail-safe control is activated while front wiper motor is operated and wiper stop in the other position than stop position.
  • The status is held at service position if the fail-safe control is activated while the service position function is operating.
Front Fog Lamp Front fog lamp relay OFF
Horn Horn relay OFF
Ignition Relay The status just before activation of fail-safe is maintained.
Starter Motor Starter control relay OFF
scientia non olet · About LEMON Manuals