DTC Detection Logic
WARNING: This page is about a different car, the 2016 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- If DTC B2608 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC DESCRIPTION .
- If DTC B2608 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC DESCRIPTION .
| DTC No. | CONSULT Screen Terms (Trouble Diagnosis Content) | DTC Detection Condition | |
|---|---|---|---|
| B2608 | STARTER RELAY | Diagnosis condition | When the ignition switch is ON. |
| Signal (terminal) | - | ||
| Threshold | BCM outputs starter motor relay OFF signal but BCM receives starter motor relay ON signal from IPDM E/R (CAN) | ||
| Diagnosis delay time | - | ||