LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2017 >> Murano SL, AWD >> Repair and Diagnosis >> Steering >> Steering Control Systems >> Steering Control System (DTC/Circuit Diagnosis) >> DTC / Circuit Diagnosis >> DTC C1143: Steering Angle Sensor >> DTC Logic >> DTC Confirmation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

DTC Confirmation Procedure

  1. PRECONDITIONING

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    GO TO STEP 2  .

  2. DTC REPRODUCTION PROCEDURE

    G-20CONSULT 

    1. Turn the ignition switch OFF to ON.
    2. Perform "Self Diagnostic Result" mode of "EPS".

    Is DTC "C1143" detected?

    YES 

    Proceed to diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .

    NO 

    Inspection End.

scientia non olet · About LEMON Manuals