Alignment Process

IMPORTANT:  Use only the alignment specifications listed in this Service Manual. Refer to Wheel Alignment (Unladen) .

• When displaying the alignment settings, many alignment machines use "indicators": (Green/red, plus or minus, Go/No Go). Do NOT use these indicators. 
  • The alignment specifications programmed into your alignment machine that operate these indicators may not be correct.
  • This may result in an ERROR.

• Most camera-type alignment machines are equipped with "Rolling Compensation" method and optional "Jacking Compensation" method to "compensate" the alignment targets or head units.

  "Rolling Compensation" is the preferred method.

  • If using the "Rolling Compensation" method, after installing the alignment targets or head units, push or pull on the rear wheel to move the vehicle. Do not push or pull on the vehicle body  .
  • If using the "Jacking Compensation" method, after installing the alignment targets or head units, raise the vehicle and rotate the wheels 1/2 turn in either direction.