Diagnosis Procedure

1. Turn ignition switch ON.
2. Check signal between rear power window switch RH harness connector and ground with oscilloscope.

   Signal name	(+)		(-)	Signal (Reference value)
   	Rear power window switch RH
   	Connector	Terminal
   Encoder signal 1	D43	12	Ground	Refer to following signal
   Encoder signal 2		15

   Courtesy of NISSAN NORTH AMERICA, INC.

Is the inspection result normal?

YES

Replace rear power window switch RH. Refer to REAR POWER WINDOW SWITCH : Removal & Installation .

NO

GO TO 2.

1. Turn ignition switch OFF.
2. Disconnect rear power window switch RH connector and rear power window motor RH connector.
3. Check continuity between rear power window switch RH harness connector and rear power window motor RH harness connector.

   Rear power window switch RH		Rear power window motor RH		Continuity
   Connector	Terminal	Connector	Terminal
   D43	12	D47	5	Existed
   	15		6

4. Check continuity rear power window switch RH harness connector and ground.

   Rear power window switch RH		(-)	Continuity
   Connector	Terminal
   D43	12	Ground	Not existed
   	15

Is the inspection result normal?

YES

GO TO 3.

NO

Repair or replace harness.

1. Connect rear power window switch RH connector.
2. Turn ignition switch ON.
3. Check voltage between rear power window motor RH harness connector and ground.

   (+)		(-)	Voltage (V) (Approx.)
   Rear power window motor RH
   Connector	Terminal
   D47	2	Ground	12

Is the inspection result normal?

YES

GO TO 5.

NO

GO TO 4.

1. Turn ignition switch OFF.
2. Disconnect rear power window switch RH connector.
3. Check continuity between rear power window switch RH harness connector and rear power window motor RH harness connector.

   Rear power window switch RH		Rear power window motor RH		Continuity
   Connector	Terminal	Connector	Terminal
   D43	4	D47	2	Existed

4. Check continuity between rear power window switch RH harness connector and ground.

   Rear power window switch RH		(-)	Continuity
   Connector	Terminal
   D43	4	Ground	Not existed

Is the inspection result normal?

YES

Replace rear power window switch RH. Refer to REAR POWER WINDOW SWITCH : Removal & Installation .

NO

Repair or replace harness.

1. Turn ignition switch OFF.
2. Check continuity between rear power window motor RH harness connector and ground.

   Rear power window motor RH		(-)	Continuity
   Connector	Terminal
   D47	4	Ground	Existed

Is the inspection result normal?

YES

Replace rear power window motor RH. Refer to REAR REGULATOR : Disassembly & Assembly .

NO

GO TO 6.

1. Disconnect rear power window switch RH harness connector.
2. Check continuity between rear power window switch RH harness connector and rear power window motor RH harness connector.

   Rear power window switch RH		Rear power window motor RH		Continuity
   Connector	Terminal	Connector	Terminal
   D43	3	D47	4	Existed

Is the inspection result normal?

YES

GO TO 7.

NO

Repair or replace harness.

Check continuity between rear power window switch RH harness connector terminals.

Is the inspection result normal?

YES

Check intermittent incident. Refer to Inspection .

NO

Replace rear power window switch RH. Refer to REAR POWER WINDOW SWITCH : Removal & Installation .