Data Monitor
|
Item (Unit) |
Data monitor item selection |
Remarks |
||
|
ECU INPUT SIGNALS |
MAIN SIGNALS |
SELECTION FROM MENU |
||
|
FR LH SENSOR (km/h, mph) |
x |
x |
x |
Wheel speed calculated by front wheel sensor LH signal is displayed. |
|
FR RH SENSOR (km/h, mph) |
x |
x |
x |
Wheel speed calculated by front wheel sensor RH signal is displayed. |
|
RR LH SENSOR (km/h, mph) |
x |
x |
x |
Wheel speed calculated by rear wheel sensor LH signal is displayed. |
|
RR RH SENSOR (km/h, mph) |
x |
x |
x |
Wheel speed calculated by rear wheel sensor RH signal is displayed. |
|
DECEL G-SEN (G) |
x |
x |
x |
Longitudinal acceleration detected by decel G-sensor is displayed. |
|
FR RH IN SOL (On/Off) |
- |
x |
x |
Front RH IN ABS solenoid (On/Off) status is displayed. |
|
FR RH OUT SOL (On/Off) |
- |
x |
x |
Front RH OUT ABS solenoid (On/Off) status is displayed. |
|
FR LH IN SOL (On/Off) |
- |
x |
x |
Front LH IN ABS solenoid (On/Off) status is displayed. |
|
FR LH OUT SOL (On/Off) |
- |
x |
x |
Front LH OUT ABS solenoid (On/Off) status is displayed. |
|
RR RH IN SOL (On/Off) |
- |
x |
x |
Rear RH IN ABS solenoid (On/Off) status is displayed. |
|
RR RH OUT SOL (On/Off) |
- |
x |
x |
Rear RH OUT ABS solenoid (On/Off) status is displayed. |
|
RR LH IN SOL (On/Off) |
- |
x |
x |
Rear LH IN ABS solenoid (On/Off) status is displayed. |
|
RR LH OUT SOL (On/Off) |
- |
x |
x |
Rear LH OUT ABS solenoid (On/Off) status is displayed. |
|
EBD WARN LAMP (On/Off) |
- |
- |
x |
Brake warning lamp (On/Off) status is displayed. |
|
STOP LAMP SW (On/Off) |
x |
x |
x |
Stop lamp switch (On/Off) status is displayed. |
|
MOTOR RELAY (On/Off) |
- |
x |
x |
ABS motor relay signal (On/Off) status is displayed. |
|
ACTUATOR RLY (On/Off) |
- |
x |
x |
ABS actuator relay signal (On/Off) status is displayed. |
|
ABS WARN LAMP (On/Off) |
- |
x |
x |
ABS warning lamp (On/Off) status is displayed. |
|
OFF LAMP (On/Off) |
- |
x |
x |
OFF Lamp (On/Off) status is displayed. |
|
OFF SW (On/Off) |
x |
x |
x |
VDC OFF switch (On/Off) status is displayed. |
|
SLIP/VDC LAMP (On/Off) |
- |
x |
x |
SLIP indicator lamp (On/Off) status is displayed. |
|
BATTERY VOLT (V) |
x |
x |
x |
Voltage supplied to ABS actuator and electric unit (control unit) is displayed. |
|
GEAR (1, 2, 3, 4, 5, 6, 7, 8, 9) |
x |
x |
x |
Gear position determined by TCM is displayed. |
|
ENGINE SPEED (RPM) |
x |
x |
x |
Engine speed judged by CAN communication signal is displayed. |
|
YAW RATE SEN (d/s) |
x |
x |
x |
Yaw rate detected by yaw rate sensor is displayed. |
|
R POSI SIG (On/Off) |
- |
- |
x |
Shift position judged by PNP switch signal. |
|
N POSI SIG (On/Off) |
- |
- |
x |
Shift position judged by PNP switch signal. |
|
CV1 (On/Off) |
- |
- |
x |
Front side switch-over solenoid valve (cut valve) (On/Off) status is displayed. |
|
CV2 (On/Off) |
- |
- |
x |
Rear side switch-over solenoid valve (cut-valve) (On/Off) status is displayed. |
|
SV1 (On/Off) |
- |
- |
x |
Front side switch-over solenoid valve (suction valve) (On/Off) status is displayed. |
|
SV2 (On/Off) |
- |
- |
x |
Rear side switch-over solenoid valve (suction valve) (On/Off) status is displayed. |
|
STOP LAMP SW2 (On/Off) |
- |
- |
x |
Stop lamp switch (On/Off) status is displayed. |
|
ACCEL POS SIG (%) |
x |
- |
x |
Throttle valve open/close status judged by CAN communication signal is displayed. |
|
SIDE G-SENSOR (m/s 2 ) |
x |
- |
x |
Transverse acceleration detected by side G-sensor is displayed. |
|
STR ANGLE SIG (deg) |
x |
- |
x |
Steering angle detected by steering angle sensor is displayed. |
|
PRESS SENSOR (bar) |
x |
- |
x |
Brake pressure detected by pressure sensor is displayed. |
|
ACCUM PRESS SEN (bar) |
- |
- |
x |
Detects the brake fluid pressure of accumulator is displayed. |
|
CONT PRESS SEN (bar) |
- |
- |
x |
Detects the brake fluid pressure of control pressure sensor is displayed |
|
EBD SIGNAL (On/Off) |
- |
- |
x |
EBD operation (On/Off) status is displayed. |
|
ABS SIGNAL (On/Off) |
- |
- |
x |
ABS operation (On/Off) status is displayed. |
|
TCS SIGNAL (On/Off) |
- |
- |
x |
TCS operation (On/Off) status is displayed. |
|
VDC SIGNAL (On/Off) |
- |
- |
x |
VDC operation (On/Off) status is displayed. |
|
EBD FAIL SIG (On/Off) |
- |
- |
x |
EBD fail signal (On/Off) status is displayed. |
|
ABS FAIL SIG (On/Off) |
- |
- |
x |
ABS fail signal (On/Off) status is displayed. |
|
TCS FAIL SIG (On/Off) |
- |
- |
x |
TCS fail signal (On/Off) status is displayed. |
|
VDC FAIL SIG (On/Off) |
- |
- |
x |
VDC fail signal (On/Off) status is displayed. |
|
CRANKING SIG (On/Off) |
- |
- |
x |
The input state of the key SW START position signal is displayed. |
|
FLUID LEV SW (On/Off) |
x |
- |
x |
Brake fluid level switch (On/Off) status is displayed. |
|
PARK BRAKE SW (On/Off) |
x |
- |
x |
Park brake switch (On/Off) status is displayed. |
|
DLOCK SW (On/Off) |
- |
- |
x |
Indicates condition of differential lock. |
|
DLOCK CHG SW (On/Off) |
- |
- |
x |
Indicates condition of differential lock mode switch. |
|
STP ON RLY (On/Off) |
- |
- |
x |
Stop lamp relay signal (On/Off) status is displayed. |
|
DDS SW (Note 1) (On/Off) |
- |
- |
x |
Hill descent control switch (On/Off) status is displayed. |
|
DDS SIG (Note 1) (On/Off) |
- |
- |
x |
Hill descent control operation (On/Off) status is displayed. |
|
USS SIG (Note 2) (On/Off) |
- |
- |
x |
Hill start assist operation (On/Off) status is displayed. |
x: Applicable
-: Not applicable
- 1: The CONSULT will display DDS (Downhill Drive Support) when referring to the Hill Descent Control system.
- 2: The CONSULT will display USS (Uphill Start Support) when referring to the Hill Start Assist system.