Work Procedure

SAVING VEHICLE SPECIFICATION (BCM)
CONSULT

Select "Before Replace ECU" mode of "Read / Write Configuration" to save or print current vehicle specification. Refer to Description .

NOTE: If "Before Replace ECU" of "Read / Write Configuration" cannot be used, use the "Manual Configuration" after replacing BCM.

GO TO 2.
SAVING VEHICLE SPECIFICATION (TPMS)
CONSULT

Select "Before Replace ECU" mode of "Read / Write Configuration" to save or print current vehicle specification. Refer to Work Procedure .

NOTE: If "Before Replace ECU" mode of "Read / Write Configuration" cannot be used, use the "Manual Configuration" after replacing BCM.

GO TO 3.
REPLACE BCM
Replace BCM. Refer to Removal and Installation .

GO TO 4.
WRITING VEHICLE SPECIFICATION (BCM)
CONSULT

Select "After Replace ECU" mode of "Read / Write Configuration" or "Manual Configuration" to write vehicle specification. Refer to Description .

GO TO 5.
REGISTER INTELLIGENT KEYS
CONSULT

For initialization and registration of Intelligent Keys, refer to CONSULT Immobilizer mode and follow the on-screen instructions.

GO TO 6.
WRITING VEHICLE SPECIFICATION (TPMS)
CONSULT

Select "After Replace ECU" mode of "Read / Write Configuration" or "Manual Configuration" to write vehicle specification. Refer to Work Procedure .

GO TO 7.
INITIALIZE TPMS
Perform TPMS initialization. Refer to Work Procedure .

Work End.