LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2023 >> Z Performance, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (1 Of 2) >> Basic Inspection >> Turbocharger WASTEGATE Control Solenoid Valve Data Initialization >> Work Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Work Procedure

  1. PRECONDITIONING 

    Check that the engine is cold [coolant temperature: 50 °C (122 °F) or less]. Is the engine cold?

    YES>>

    GO TO 2.

    NO>>

    Park the vehicle at a cold place and cool down the engine. And then, GO TO 2.

  2. INITIALIZING A LEARNING VALUE 

    SYMBOL With CONSULT

    1. Start the engine and let it idle at least 10 seconds.
    2. On CONSULT screen, select "ENGINE" >> "Active Test" >> "WASTEGATE ACTUATOR".
    3. Operate the actuator from the fully closed position to the fully open position and check that actual value is within the range of (- 0.00052) - (+ 0.00052) m when the target value is set at 0 m.

    >>

    END

scientia non olet · About LEMON Manuals