LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2024 >> Frontier SL, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (DTC/Circuit Diagnosis) (4 Of 6) >> DTC/Circuit Diagnosis >> DTC P10CC: Internal Control Module Fuel Injector >> DTC Description
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

DTC Description

DTC DETECTION LOGIC 

DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition
P10CC-00 Cylinder 5 injector A (Cylinder 5 injector A) Diagnosis condition -
Signal (terminal) -
Threshold
  • Direct injector driver unit is malfunctioning.
  • ECM detects No. 5 injector circuit is shorted.
Diagnosis delay time -

POSSIBLE CAUSE 

FAIL-SAFE 

Engine Control System 

Engine operating condition in fail-safe mode
Fail safe mode Vehicle behavior
Traveling control mode Accelerator angle variation control ECM controls the accelerator pedal depression speed to make it slower than actual speed. This causes a drop in accelerating performance and encourages the driver to repair malfunction.
NOTE: SYMBOL ECM does not control the accelerator pedal releasing speed.
Device fix mode
  • Fixes electric intake valve timing control motor in the reference position.
  • Fixes exhaust valve timing control solenoid valve in the reference position.
  • The Intake manifold runner control valve motor is turned OFF (Intake manifold runner control valve opens).
Combustion control mode Stratified charge combustion control at starting No stratified charge combustion at starting (cold start).

Idle Start/Stop System 

Not applicable