September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Component Inspection (FPCM)

CHECK FUEL PUMP CONTROL MODULE (FPCM)

Check the voltage between FPCM terminals under the following conditions.

FPCM			Condition	Voltage
Connector	+	-
Connector	Terminal	Terminal
B58	5	6	For 1 second after turning ignition switch ON	Approx. 8.5 V
			More than 1 second after turning ignition switch ON	Approx. 0 V
			Idle speed	Approx. 8.5 V

Is the inspection result normal?

INSPECTION END

Replace FPCM.