LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Oldsmobile >> 1991 >> Custom Cruiser >> Repair and Diagnosis >> Electrical >> Charging Systems >> Alternator & Regulator >> On-Vehicle Testing >> Current Output Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Current Output Test

CAUTION: Never run engine with alternator output terminal disconnected from battery.
  1. Connect an ammeter in series with alternator output cable. Connect positive voltmeter lead to positive battery post. Connect negative lead to negative battery post.
    CAUTION: Carbon-pile testing is part of this procedure. To avoid battery explosion, turn carbon pile OFF before connecting or disconnecting to and from vehicle battery.
  2. Ensure carbon pile control knob is in OFF position. Connect carbon pile to battery. Start engine and run at moderate speed.
  3. Turn on all accessories except for heated windshield on vehicles so equipped. Load battery with carbon pile to obtain maximum alternator output. Adjust carbon pile to maintain voltage at 13 volts or more.
  4. If ammeter reading is within 15 amps of rated output, alternator is okay. If ammeter reading is not within 15 amps of rated output, repair or replace alternator.
scientia non olet · About LEMON Manuals