Code 24, Vehicle Speed Sensor: Notes
Code will set if Codes 28, 56 and 91 are not set, buffered vehicle speed is less than 5 MPH, transaxle turbine speed is 3000 RPM or more and transaxle indicates a forward gear.
NOTE:
Test numbers refer to numbers on diagnostic chart.
- If code is current, fault is present and can be diagnosed directly. If code is stored as history, use Code 75 chart to diagnose intermittent fault.
- VSS will generate a frequency of greater than zero hertz when wheel is spun by hand. If it does, PCM may be at fault. If it does not, check sires/sensor for opens and shorts.