Code 44, Bank 1 Oxygen Sensor Lean Exhaust: Notes
Code will set if Codes 14, 15, 16 ,21, 22, 26, 27, 31, 32, 34 and 119 are not set, throttle switch is open, throttle angle is 5.4-25.0 degrees, engine is at operating temperature, engine speed is greater than 800 RPM, traction control is not active, bank 1 sensor voltage is less than 0.3 volt for more than 50 seconds and MAP is greater than 20.2 kPa.
NOTE:
Test numbers refer to numbers on diagnostic chart.
- If Code 13 is also set, use that chart first.
- If oxygen sensor is operating properly, voltage will fluctuate above 0.3 volt. A lean condition will cause voltage to remain below this level.
- If voltage is greater than .15 volt, PCM and sensor high circuit are okay.