Code 62, Cruise Control Vacuum Solenoid: Notes
Code will set if any one of the following conditions is present for more than half a second: cruise control vacuum solenoid circuit is shorted to voltage when solenoid is commanded off, if vacuum solenoid circuit is open, if circuit is shorted to ground when the PCM is commanding solenoid on.
NOTE:
Test numbers refer to numbers on diagnostic chart.
- Checks for short to voltage or faulty PCM.
- Checks for short to ground or faulty PCM.
- Checks for open cruise vacuum solenoid circuit.
- Checks cruise vacuum solenoid circuit for open or short to ground or a faulty PCM.
- Checks for an open in ground path or a faulty cruise control servo.