Both Mirrors Do Not Move Manually
NOTE:
After repair or component replacement is completed, perform appropriate MEMORY SYSTEM CHECK under TROUBLE SHOOTING
to verify system is functioning properly.
- Perform POWER MIRROR MEMORY SYSTEM CHECK under TROUBLE SHOOTING. Go to next step.
- Using test light, backprobe between outside mirror switch terminal No. 8 (Orange wire) and ground. If test light illuminates, go to next step. If test light does not illuminate, go to step 9).
- Using test light, backprobe between outside mirror switch terminals No. 8 (Orange wire) and No. 9 (Black wire). If test light illuminates, go to next step. If test light does not illuminate, go to step 10).
- Using test light, backprobe between outside mirror switch terminals No. 8 (Orange wire) and No. 7 (Yellow wire). If test light illuminates, go to next step. If test light does not illuminate, go to step 11).
- Using test light, backprobe between outside mirror switch terminals No. 8 (Orange wire) and No. 15 (Light Blue wire). If test light illuminates, go to next step. If test light does not illuminate, go tostep 11).
- Using test light, backprobe between outside mirror switch terminals No. 8 (Orange wire) and memory seat/mirror module Blue, 32-pin connector C1, terminal C6 (Yellow wire). See Fig 1 . If test light illuminates, go to next step. If test light does not illuminate, go to step 12).
- Using test light, backprobe between outside mirror switch terminals No. 8 (Orange wire) and memory seat/mirror module connector C1, terminal D6 (Light Blue wire). If test light illuminates, go to next step. If test light does not illuminate, go to step 13).
- Replace memory seat/mirror module. See MEMORY SEAT/MIRROR MODULE under REMOVAL & INSTALLATION.
- Repair open in Orange wire between outside mirror switch and right rear junction block.
- Repair open in Black wire between outside mirror switch and ground.
- Replace outside mirror switch.
- Repair open in Yellow wire between outside mirror switch and memory seat/mirror module connector C1.
- Repair open in Light Blue wire between outside mirror switch and memory seat/mirror module connector C1.