Cruise Control Module: Service and Repair

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the battery negative cable.
2. Disconnect the cruise control cable. Refer to Cruise Control Cable Replacement (2.2L) or Cruise Control Cable Replacement (4.3L).
3. Disconnect the electrical connectors, as necessary.
4. Remove the 3 nuts that retain the cruise control module to the mounting bracket studs.
5. Remove the cruise control module from the mounting bracket.
6. Remove the 3 screws that retain the mounting bracket to the cowl panel.

INSTALLATION PROCEDURE
1. Install the mounting bracket to the cowl panel with the 3 screws.

Tighten
Tighten the screws to 4.5 N.m (40 lb in).

2. Install the cruise control module to the vehicle.
3. Install the 3 nuts that retain the cruise control module to the mounting bracket.

Tighten
Tighten the nuts to 9.0 N.m (6.6 lb ft).

4. Connect the electrical connectors, as necessary.
5. Install the cruise control cable.
6. Connect the battery negative cable.
7. Test the systems operation.