Rev Test
WARNING: This page is about a different car, the 1998 Pontiac Grand Am, 1998 Oldsmobile Achieva, and 1998 Buick Skylark. However, it is still accessible from the selected car via links, so may be relevant.
- Using scan tool, command PCM to enable cruise control system. Set parking brake and start engine. Move cruise control switch to OFF position, and then to ON position. Wait 3 seconds. After 3 seconds, depress and hold SET button. Hold slider switch in Resume/Accelerate (R/A) position. Fully depress and hold brake pedal.
- After 10 seconds, release brake pedal while holding R/A and SET switches. Engine RPM should increase momentarily, and then return to idle. Clear any Diagnostic Trouble Codes (DTCs) which may be set.