Crankshaft Position (CKP) Sensor Output Signal
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1997 Pontiac Grand Prix, 1997 Pontiac Grand Am, 1997 Oldsmobile Cutlass Supreme, 1997 Oldsmobile Cutlass, and 1997 Oldsmobile Achieva. However, it is still accessible from the selected car via links, so may be relevant.
Set DVOM on 2-volt AC scale. Connect DVOM leads to CKP sensor located on side of engine block. Crank engine and observe voltmeter reading. CKP sensor should generate a voltage signal of about 2 volts.