Removal & Installation
Locate EBCM/EBTCM. See EBCM/EBTCM LOCATION . Disconnect negative battery cable. Remove necessary components to gain access to EBCM/EBTCM. Release pressure tabs or retaining nuts attaching EBCM/EBTCM to bracket. Disconnect EBCM/EBTCM electrical connectors. Remove EBCM/EBTCM from vehicle. To install, reverse removal procedure.
EBCM/EBTCM LOCATION
| Application | Location | |
|---|---|---|
| "J" Body | Inside Left Front Fender | |
| "N" Body | ||
| 1998 Achieva, Grand Am & Skylark | On Right Side Of Firewall, In Engine Compartment | |
| 1999 Alero & Grand Am | Inside The Left Front Fender | |
| Cutlass & Malibu | In Left Wheelwell Housing | |
| "W" Body | ||
| Intrigue, 1998 Regal & Century, Lumina & Monte Carlo | Behind Left Side Of Instrument Panel | |
| 1999 Lumina & Monte Carlo | Right Hand Side Of instrument Panel, above Instrument Panel Compartment | |