Data Link Connections Diagnostic System Check
WARNING: This page is about a different car, the 1999 Pontiac Grand Am and 1999 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
- Connect scan tool to Data Link Connector (DLC). Scan tool main menu will appear on display. If scan tool does not power up, go to SCAN TOOL INOPERATIVE .
- Select diagnostic circuit check, CLASS 2 DTC CHECK from scan tool menu. DTCs should not be present. If DTCs are present, go to appropriate DTC table under appropriate class 2 data system.
- Select BODY DIAGNOSTICS from scan tool menu. Select SIR UART data line information. Check for SIR DTCs. DTCs should not be present. If DTCs are present, go to AIR BAG SERVICE & REPAIR manual.
- Establish communication with Electronic Brake Control Module (EBCM). Check for EBCM DTCs. DTCs should not be present. If DTCs are present, go to DTC table under appropriate ANTI-LOCK BRAKES article in BRAKES.