Front-End Discriminating Sensor: Installation
WARNING: This page is about a different car, the 1998 Oldsmobile Aurora and 1998 Buick Riviera. However, it is still accessible from the selected car via links, so may be relevant.
- Align sensor to vehicle, ensuring arrow on sensor body is pointing toward front of vehicle. Install fasteners and tighten to 94 INCH lbs. (11 N.m). Reconnect sensor connector and reinstall CPA clip.
- Activate air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM . Check system for proper operation. See TESTING - SYSTEM OPERATION CHECK .