Body Control Module: Service and Repair

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

1. Disconnect the negative battery cable.
2. Remove the right sound insulator.
3. Remove the body control module (BCM) (2).
4. Remove the BCM connectors in the following order:
4.1. Pink connector C3
4.2. Connector C1
4.3. Connector C2

INSTALLATION PROCEDURE
1. Install the BCM connectors in the following order:
1.1. Connector C1
1.2. Connector C2
1.3. Pink Connector C3
2. Install the BCM (2).
3. Install the right sound insulator.
4. Connect the negative battery cable.