Electronic Brake Traction Control Module (EBTCM): Removal
- EBTCM is mounted on top of left front frame rail (Camaro and Firebird) or on left side strut tower in engine compartment (Grand Prix and Intrigue). Disconnect negative battery cable. Turn ignition switch to OFF position. Pull out lock tab from EBTCM harness connector and disconnect connector. Disconnect pump motor connector from bottom of EBTCM.
- Remove and discard 6 EBTCM-to-Brake Pressure Modulator Valve (BPMV) screws. Using care so as not to damage seal and solenoid valves, pull EBTCM and separate from BPMV. Note location and position of wave spring(s) between EBTCM and BPMV. Remove and discard wave spring(s).